Contact Us
(0086)18680196498
info@rooneylighting.net
www.stagelightingzone.com
You are here: Home > Product News

wireless battery par

JTLite- wireless battery par

(functions are : wireless, wifi, battery powered optional)

SAFTY NOTE

Circuit boards should not be stacked one on top of the other, so that
they can be easily handled with care and can not be thrown in a random
manner to prevent circuit boards from being deformed and components
from damage.
Power input range between 12-36V, different lamp power input will be
different, please consult when using, to avoid burning due to
improper use of the motherboard or lamp beads, causing unnecessary
economic losses, the power of the positive and negative It cannot
be reversed.
When assembling, you should take the edge of the PCB board. Do not try
to carry out the lifting operation on a component for the sake of
convenience, and avoid the unfavorable situation that the pad is
dropped or damaged due to force.
All terminals should be connected in accordance with the process
requirements and the correct way. Note the direction and polarity.
Try not to live the operation or remove the plug cable to avoid short
circuit or component damage.
Do your best to prevent static electricity.
Customer operation errors or other human-made burnout defects are not
within the scope of return and replacement, and maintenance requires
the corresponding component costs.

Main Functions Introduction

DMX512 console control, online control via signal cable or 2.4G wireless
Master and slave can be controlled online via signal cable or 2.4G wireless
Mobile WiFi operation control, support for Android Android 2.3 and above, Apple
iOS 4.3 and above (this feature is applicable to WiFi motherboard)
Mobile App Name: LEDWiFi Language: Software automatically recognizes
Chinese or English based on the system
Static color selection (6 colors, dimming value 0-255) + strobe function (adjustable
speed 0-20)
Macro color: 32 color options
Automatic color jump function (adjustable speed 1-20)
Color grading function (speed adjustable 1-20)
Color mutation function (speed adjustable 1-20)
Strobe with red background, strobe with green background, strobe with blue
background, strobe with yellow background (adjustable speed 0-20)
Three voice-activated functions (jump, transition + gradient, strobe) +
voice-activated sensitivity (0-100) can be adjusted via menu adjustment control or
remote control 2.4G wireless electronic switch, you can use the menu to open or close the 2.4G
wireless power, whether the wireless module is turned on or off through the icon in
the upper left corner of the interface.
WiFi module electronic switch, through the menu to turn on or turn off the WiFi module power, whether the WiFi module is turned on or off through the icon in the
upper left corner of the interface.
White balance settings, appropriate adjustment of the brightness of the 6 colors
(also the role of fine-tuning the current), the value is (127-255)
The battery icon in the upper right corner of the interface can be set to the off state
by setting the appearance of an icon that can be turned on or off, such as a product
without a battery.
Screensaver settings: can be set to normally open or 5 seconds, 10 seconds, 15
seconds automatically turn off the display backlight
Automatic key lock: Can be turned on or off via menu settings
Fan control: Smart fan can be turned on or off according to temperature, and can be
forced to set high speed, medium speed, low speed mode
Infrared remote control settings: Can be turned on or off via menu settings

Display Screen: TFT display

B: How to Operate:


To select a preset function, press the MENU button to enter the main menu.
The display will show the corresponding menu function. When the MENU
button is pressed again, the next menu function is selected. If you repeatedly
press the MENU button, you will continue to select each menu function. In
the main menu mode or use UP/DOWN, you can also select the various
main menus. After the selection is completed, press the ENTER button to
confirm or enter the next menu. Features. If the system parameter is set,
pressing the ENTER button will automatically return to the previous menu
function status. System parameters do not need to be pressed to save
automatically.

"Choose Pattern" selection mode
Select “Choose Pattern” and press ENTER to confirm. The display will
show the corresponding function menu. Such as static color, macro function
color mixing, show mode, voice control mode. Use the UP/DOWN button
to select between functions. If you press the ENTER button, the display will
advance to the next menu item. If you press the MENU button, you exit to
the previous menu mode. When selected, the parameters will be
automatically saved.

“User Settings” user settings
Select “User Settings”, press ENTER button to confirm, the display will
enter channel options, use UP/DOWN button to select “6Ch” (6 channels
mode), “10Ch” (10CH channel mode) When the ENTER button is pressed
again, the menu will automatically jump to the DMX512 address setting
mode. With the UP/DOWN button, the desired setting address code can be
adjusted from 1 to 512. After the selection, the parameters will beautomatically saved. When the DMX512 signal is received, the
“Connection” prompt appears on the screen. If the DMX512 signal is
disconnected, the “Disconnect” prompt appears on the screen. If you press
the ENTER or MENU button, the display will exit to the previous menu
mode.

"Slave" accessory mode
Select “Slave” and press ENTER to confirm. “OK!” will be displayed.
Indicates that the slave has entered the receive mode status. After the
selection, the parameters will be automatically saved. When the host signal
is received, the interface will display “Connection” prompt. If the host
signal is disconnected, the interface will show “Disconnect” prompt, if you
press ENTER Or MENU button, the display will exit to the previous menu
mode.

"System Settings" system setting mode
Select “System Settings”, press the ENTER button to enter the next menu,
use the UP/DOWN button to select a different setting between settings,
press the ENTER or MENU button, the display will exit to the previous one
Level menu mode.

C: DMX512 Controller Mode


Press the MENU button until “Chnd” (channel mode) is displayed on the
screen, press the ENTER button to confirm. Use the UP/DOWN button to
select “6Ch” (6 channels mode) or “10Ch” (10CH channel mode) as
required, press the ENTER button to exit to the previous menu “Chnd”,
then use the DOWN/UP button to select “Addr” "(DMX512 address code
setting), press ENTER button to confirm, the display will show the
corresponding address code value. Use the UP/DOWN button to adjust the
desired setting of the address code from 1 to 512. In this case, you can
receive the DMX512 console control signal.
If you want to use this feature, please refer to the following diagram to set
the DMX512 address of the first 4 fixtures:
6CH mode: 1: A001, 2: A007, 3: A013, 4: A019
10CH mode: 1: A001, 2: A011, 3: A021, 4: A031

D: Master and slave built-in program control


When connecting multiple fixtures in the master/slave mode, except for the
first fixture, select "Slave" for the other fixtures at the back, press the
ENTER button to confirm, and "OK!" will be displayed. Indicates that the
slave has entered the receive mode status. After the selection, the parameters
will be automatically saved. When the host signal is received, the interface
will display a “Connection” prompt. If the DMX512 signal is disconnected,
the interface will display a “Disconnect” prompt, if you press ENTER Or
MENU button, the display will exit to the previous menu mode. The first
luminaire is used as a host, and all show modes can be selected. The slave
will be controlled by the host to perform the same action.

E: Wifi Mode Operation


In the “User Settings” screen, press the ENTER button, use the UP/DOWN
button to select “WIFI” (WIFI mode), press the ENTER button, the WiFi
icon will appear, indicating that the WiFi module is turned on, and you can
set it via the phone. For connection control. Open the phone settings
function, find the wireless and network WLAN items, connect the name
device of “LED_xxx”
When the connection is successful, exit the mobile phone function settings,
open the LedHome application software, add the scene for the first time
use, select the "entertainment" scene, store, and then select the direct control,
the color ring control interface will appear, then you can make the
appropriate Mode operation. Different phone interface may be different, but
the function is unchanged.

F: Flycase OEM

OEM 6 in 1, 8 in 1, 10 in 1 flycase with charging base.
Rooney 008618680196498